Washing machine problems make the man panic.
People with washing machine problems have a question why is my washing machine not spinning or draining correctly to which they want the right solution.
Most often it could be due to any object that got stuck in the machine hose or the pump.
Also, the pump might be broken. Well, there are various possibilities in this regard.
If you want to know how to repair washing machine spin dryer, read on this impressive piece of content as you will get to see a lot more in this regard here.
Why Is My Washing Machine Not Spinning or Draining Properly?
Some of the most common reasons why is your washing machine not spinning or draining are:
Washing heavy bath towels result in a weight imbalance that affects the sensors. To repair it you need first to redistribute the load and then rerun the washer.
Use of extension Cord
Due to an extension cord, the washer gets low voltage and this result in overheating the machine due to which it shuts down quite early.
Thus to solve it you need to plug it directly into the outlet.
Also, have a look at the troubleshooting method of an overheating car.
Clogged, Frozen or Kinked Drain
You need to make sure that the hose is draining into the sink properly.
The spin cycle won’t start, and the water won’t drain if the outlet pipes are blocked.
A smelly washing machine indicates that the drainage pipe is blocked.
Too much detergent or soft water results in excessive suds.
Traps and Mounts
If the drain hose is mounted too high, then the dirty water will flow into the washer after the completion of the drain cycle.
Thus the hose need not be mounted higher.
It should be lower than the top of the back of the washing machine.
The drive belt is regarded as the soul and heart of the washing machine. A machine with a broken belt won’t spin.
How to Fix the Washing Machine Not Spinning?
Direct Drive Motor Coupling
Many top-loading machines make use of a direct drive motor coupling for power transfer between the transmission on the motor.
The drive coupling connects the motor and the transmission. It makes a rubber coupling between them.
Thre are two driver forks. One of them is attached to the transmission input shaft while the other one is attached to the drive motor shaft.
The rubber coupling present between the drive forks prevents the breaking of forks.
Under regular use, there is a wire on the coupling that will cause the drive fork to slip. This way, it won’t engage the transmission.
If your washing machine fills and drains perfectly, but doest spin than the issue is with the coupling.
To fix it, you need to access the drive coupler. Get the necessary good quality homeowoner tools for this task.
Also, make sure you first disconnect the power before doing any repair.
How to Repair Washing Machine Spin Dryer Not Spinning on Spin Cycle?
If your washing machine’s washer isn’t spinning on the spin cycle, then read on the tips to solve it.
Redistributing the Off-balanced Load
An unbalanced laundry load also results in an adequate spin cycle.
The clothing sometimes settles on one side of the drum, and this way it throws off the washing machine motion. It mostly occurs during the washing of heavy items.
If you find the distribution problem, then rearrange the wet laundry and run the spin cycle.
The washer won’t spin correctly if it’s positioned unevenly on its pedestal. If you find other signs of an unlevel machine like the vibration and noise, then adjust the individual legs to make the washer completely level.
The Washing Machine Stopped Working No Power
Have a look at the power source and check if it is plugged in properly. Sometimes a juggle or a mid-cycle bump results in causing the plug to come out of the outlet. Also, have a look at the circuit panel of your home to ensure that the breaker didn’t trip.
Check Out the Buyer Guide of Electrician Tools
Inspect the Spin Switch
There is a small protrusion on the underside of the lid in the top-loading washer that depresses the switch on closing the lid.
This protrusion won’t trigger the switch if it is bent out of its shape.
You need to test it manually.
Open the lid and then select a spin cycle on your washer. Then depress the switch manually using your finger.
If you find it spinning normally then trigger the spin switch by rebending the protrusion.
Did the washer not spin on pressing the switch manually?
In such a case, the issue can be with the switches itself.
You consult your owner’s manual or replace the broken switch.
Issues With the Extension Cord
Many extensions cords aren’t capable of conducting enough electricity that is required to power the motor of the washer. This results in overheating, and the motor shuts itself off.
Relying on extension cords also shortens the life of the washer.
Thus the solution is to either move the washing machine nearer to the outlet or create a new outlet near it with some reasonable distance.
Readjust or Replace the Drive Belt
A drive belt that slips off from the pulley wheel or a broken drive belt results in agitation during the wash cycle. Due to this, there is a noise of the motor during the spin cycle.
Remove the Washer’s Back
If you find the belt, not on the pulleys, then you will have to replace it. Get the belt according to your washer’s brand and model.
Do Read 10 Best Mechanic Tools Reviews
Remove the Blockage in Draining System
Small items like clothing clips and button sometimes fall out of the clothing and get tucked in the hoses that attach the drain pump and the washer.
This blocked drainage does not let the machine to spin correctly. The drain pump is present on the back of the washer in some machines, and thus you can access it quite easily.
While the need arises to detach the washer back in some washers.
Thus you need to remove the clamps holding the hoses and then clear the clogs that cause a blockage. Afterward, reattach the hoses.
When to Call Pros?
The following issues require some additional expertise.
- Motor not running at all
- Borken motor coupler
- Nonfunctioning drain pump.
There are various issues by which you might find your washing machine stopping at the spin and rinse cycle.
There could be a blockage in the pipe, or it might be out of balance.
This article offers the answer to the most confusing question related to washing machines that people most often ask i.e., why is my washing machine not spinning or draining properly.
By and large, you can have a trouble-free operation by some proper care, use, and maintenance of your washing machine.
Also, Checkout Best All in One Tool Set Reviews